Instructions / Assembly

ManualsBrandsNoble House ManualsOutdoor Lounge FurnitureSanta Ana Light Brown 5-Piece Acacia Wood Outdoor Sectional Set with Cream Cushions

Assembly Instructions

Caution: You must read this before you proceed.

Armless Chair

Caution: This Armless Chair is NOT a TOY.

Keep your child/children at bay during the assembly process.

Whenever moving/lifting the Armless Chair and to prevent damage to the

Armless Chair, two adults are needed to execute these actions.

Noble House Home Furnishings LLC 1 of 8

Summary of content (8 pages)

PAGE 1
Assembly Instructions Caution: You must read this before you proceed. Armless Chair Caution: This Armless Chair is NOT a TOY. Keep your child/children at bay during the assembly process. Whenever moving/lifting the Armless Chair and to prevent damage to the Armless Chair, two adults are needed to execute these actions.
PAGE 2
Part List Picture Label W Description Qty Backrest Panel 1 Left Panel X Right Panel Y 1 1 Z Seat Panel 1 A1 Front Support Bar 1 B1 Seat Cushion 1 C1 Back Cushion 1 Description Qty ⑬ Screw (M7x70mm) 5 ⑭ Screw (M7x120mm) 3 ⑮ Allen Key 1 Hardware No.
PAGE 3
Assembly Preparation Before Beginning Assembly: Assembly Steps Overview Backrest Panel (W) Back Cushion (C1) Seat Cushion (B1) Right Panel (Y) Left Panel (X) Seat Panel (Z) Front Support Bar (A1) FRONT FACING This Armless Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Armless Chair parts, the above picture is to help you put the various parts into perspective.
PAGE 4
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 With the help of your adult partner, attached the Back Panel (W) and Front Support Bar (A1) into mortises on Left Panel(X) as shown above Then secure Back Panle(W) and Front Support Bar(A1) to Left Panel(X) by using Screw(⑬), (⑭) with Allen Key(⑮). Do not fully tighten the Screws.
PAGE 5
Step 3 With the help of your adult partner, repeat the same process on step 2 with the Right Panel (Y) to Backrest Panel (W) and Front Support Bar(A1) Do not fully tighten the Screws. Step 4 Z Insert Seat Panel (Z) onto Chair frame as shown above.
PAGE 6
Step 5 B1 Place Seat Cushion(B1), onto the Chair, and affix the velcro straps around the Chair as shown above. Step 6 C1 Place Seat Cushion(C1), onto the Chair as shown above. Then EXERT pressure, floorwards onto the Armless Chair with both hands. This pressure will help the Ottoman reach full alignment at all joints. In a sequential manner, gradually tighten alScews at all joints until evenly secured. Inspect the Armless Chair and make sure all parts are adequately connected.
PAGE 7
Step 7 With assistance from your adult partners, place the Chairs facedown and connect the pre-attached clips to connect the Chairs together. Note: This is an optional step in case you want to connect all the Chairs in the set together and should be performed before affixing the cushions.
PAGE 8
Noble House Home Furnishings LLC 8 of 8