Assembly Instructions Caution: You must read this before you proceed Daybed CAUTION : This Daybed is NOT a TOY. Keep your child/children at bay during the assembly process. Whenever lifting or moving the Daybed, two adults may be needed to execute these actions.
Part List Label Picture Description QTY A Backrest Panel 1 B Left Leg Panel with Support Leg 1 C Right Leg Panel with Support Leg 1 D Extendable Seat Panel 1 E Left Front Leg 1 F Right Front Leg 1 G Foldable Seat Cushion 1 H Back Pillow 6 Noble House Home Furnishings LLC 2 of 10
Hardware Label Picture Description QTY ① Allen Key 2 ② Bolt (M6x25mm) 5 ③ Bolt (M6x35mm) 3 ④ Sleeve Nut (M6x15mm) 3 ⑤ Screw (M7x90mm) 3 ⑥ Screw (M7x70mm) 5 ⑦ Screw (M6x60mm) 3 Noble House Home Furnishings LLC 3 of 10
Assembly Preparation Before Beginning Assembly: Assembly Steps Overview Back Pillow (H) Backrest Panel (A) Right Leg Panel with Support Leg (C) Foldable Seat Left Leg Panel with Support Leg (B) Extendable Seat Panel (D) Left Front Leg (E) Right Front Leg (F) FRONT FACING This Daybed has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Daybed, the above picture is to help you put the various parts into perspective.
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 D B B D C With assistance from your adult partners, attach Left Leg Panel with Support Leg(B) to Extendable Seat Panel(D) using Screw(⑤) and Screw(⑥) with Allen Key(①) as shown in above picture. Repeat the same process to secure Right Leg Panel with Support Leg(C) to Extendable Seat Panel(D). Do not fully tighten the Screws.
Step 3 3.2 3.1 Unlock Close the lock With assistance from your adult partners, turn the Daybed right side up. 3.1) Pull down the button on Left Leg Panel with Support Leg(B) to unlock Support Leg. 3.2) Turn Support Leg into position as shown in above picture, then pull up the button to lock the Support Leg. Step 4 4.1 4.2 4.1) With assistance from your adult partners, slightly pull apart the Leg Panels to position the Backrest Panel(A) between the Leg Panels. 4.
Step 5 5.1 5.2 5.1) With assistance from your adult partners, pull out the Extendable Seat Panel(D) in the direction of the arrow as shown in above picture. 5.2) Vertically, using Screw(⑦) with Allen Key(①) and horizontally, using 2 Bolts(②) with Allen Key(①) attach Left Front Leg(E) to Extendable Seat Panel(D). Repeat the same process to attach Right Front Leg(F) to Extendable Seat Panel(D). Fully tighten all the Screws and Bolts at all joints in a sequential manner.
Step 6 Place Extendable Seat Cushion(G) and Back Pillows(H) onto the Daybed as shown in above picture. Your Daybed is now ready to used. This Daybed can only be used on a flat, level surface.
To Retract the Daybed: Fold Foldable Seat Cushion(G) in the direction of the arrow and then, push the Extendable Seat Panel(D) to shorten the Daybed as shown in above picture. Your Daybed is now ready to used. This Daybed can only be used on a flat, level surface.
Noble House Home Furnishings LLC 10 of 10
