Caution : You must read this before you proceed Bench Noble House Home Furnishings LLC Page 1 of 6
Label Picture Description QTY A Left leg 1 B Right Leg 1 C Top 1 Description QTY Label Picture ① Bolt( M8*64mm) 9 ② Flat Washer 9 ③ Allen Wrench 1 Before Beginning Assembly: X9 X9 Noble House Home Furnishings LLC Page 2 of 6
Overview Top (C) Right Leg (B) FRONT FACING This Bench has multiple parts and may require up to 30 mins to assemble. To give you an overview of the Bench parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise the parts and steps before assembly. Step 1 Unpack and place all parts on a clean, non-marring surface.
Step 2 NOTE : Each leg numbred. Please match accroding to respective markings. C A ② ② ① ① Place the Top (C) with its one side face skywards onto a clean, soft surface to avoid any scratches or damages to the product. Align the tenon of Top (C) into the Mortise of Left Leg (A) as shown above. Then, affix the Top (C) with Left Leg (A) by using Short blots (①)+Flat Washer(②) and Allen Wrench (③) DO NOT FULLY TIGHTHEN BOLTS.
Step 4 With the help from your partner, turn the Bench to rest on Top (C) so that Right Leg (B) is now facing skywards. Repeat the same process by affixing Bolts (①), (②) to designated points. DO NOT FULLY TIGHTHEN BOLTS. Step 5 Turn the Bench right side up. Place the Bench on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and gracefully, sit into to the Bench. This would help to align all the parts at all the joint areas.
Turn the Bench in a synchronised manner. CAUTION 1: When tightening these blots, tighten sequentially. DO NOT tighten any blots fully and then towards the next one. This would cause the frame to warp. If there is still wobbles, loosen the blots and execute this same process. IF Bench IS NOT STABLE , IT COULD LEAD TO DAMAGING THE PRODUCT. Ensure all blots are fully locked into position. The Bench is ready to be used. Caution 2: This Bench can only be used on a flat, level surface.