Assembly Instructions Caution : You must read this before you proceed Please look in the red bag for hardware packs and legs. Right Sofa Parts List Label Description QTY A Right Side Panel 1 B Left Side Panel 1 C Shertsn back Support Bar (size: 57*32*1.8MM) 1 D Longer back Support Bar (size: 65*16*1.
Hardware Label Picture Description QTY ① Bolt: M6*15MM 3 ② Bolt: M6*20MM 15 ③ Allen Key 1 Assembly Preparation Before Beginning Assembly: Assembly Steps Shertsn back Support Bar (C) Back Cushion (G) Seat Cushion (E) Longer back Support Bar (D) Left Side Panel(B) Right Side Panel(A) Seat Panel (Labeled with face and bottom) (F) Noble house Home Furnishings LLC Right Side Cushion (H) Page 2 of 8
Back Cushion (G) 1420 Right Side Cushion (H) 610 G H velcro F 710 1420 velcro Seat Cushion (F) This Left Sofa has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Left Sofa parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 D Open the carton and place all the parts onto a clean, non-marring surface.
Step 3 3 Use hardware ② 20 mm screw for the screw boss at two sides 2 Step 3.1 E A 3 Use hardware ① 15 mm screw for the two screw boss in the middle 1 Step 3.2 3.1) Attach the Seat Panel(E) to Side Panel(A) using Bolts(②) with Allen Key(③) for the screw boss at two sides as shown above. 3.2) Attach the Seat Panel(E) to Side Panel(A) using Bolts(①) with Allen Key(③) for the screw boss in the middle as shown above. Do not fully tighten Bolts.
Insert another longer Back Support Bar(D) into the Side Panel(A) using Bolt(②) with Allen Key(③). Do not fully tighten Bolt. Step 6 E C D 3 2 A Insert the shorter Back Support Bar(C) into the Side Panel(A) using Bolt(②) with Allen Key(③). Do not fully tighten Bolt. Step 7 B D C 2 E A 3 Insert Left Side Panel(B) to Seat Panel (E) and Back Support Bars (C&D) using Bolt ② and Allen key (③).
Step 8 3 2 Step 8.2 Step 8.1 B 2 3 C E D 8.1) Attach the Seat Panel(E) to Side Panel(B) using Bolts(②) with Allen Key(③) for the screw boss at two sides as shown above. 8.2) Attach the Seat Panel(E) to Side Panel(B) using Bolts(②) with Allen Key(③) for the screw boss at two sides as shown above. Do not fully tighten Bolts. Step 9 Stand the Loveseat up. Place the Loveseat on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected.
Step 10 G H F velcro Behind Put the Seat Cushion (F), Back Cushion (G) and Right Side Cushion (H) on the Loveseat. Your Loveseat is ready for use. Additional Hardware: Step 11 step11.1 step11.2 This is the corner sofa buckle. Connecting Piece Please place the sofa cushion after the sofa frame clasp is connected. Insert coaxial clasp as shown in the legend.
Noble house Home Furnishings LLC Page 8 of 8