Caution: You must read this before you proceed Single Chair Label Picture Description QTY A Left Armrest / Leg 1 B Right Armrest / Leg 1 C Seat 1 D Backrest 1 E Seat Cushion 1 1 OF 6
Label Picture Description QTY ① Allen Key 1 ② Bolt (M6*25mm) 8 ③ Bolt (M6*35mm) 2 ④ Bolt (M6*60mm) 2 ⑤ Washer 12 Before Beginning Assembly: OVERVIEW Backrest(D) Right Armrest / Leg(B) Left Armrest / Leg (A) Seat Cushion (E) Seat (C) FRONT FACING This Single Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Single Chair parts, the above picture is to help you put the various parts into perspective.
Step 1 Open the carton and place all the parts onto a clean, non-marring surface. Place the Backrest(D) with its inside facing up. Attach Seat(C) to Backrest(D) using Bolts(②&③) and Washers(⑤) with Allen Key(①) as shown in the picture above. Do not fully tigthen Bolts. ATTENTION: Occasionally some of the PE Wicker shifts and covers the mounting positions preventing easy assembly. The PE wicker should never be cut, but moved away from the mounting positions.
Step 3 Place the Right Armrest/Leg(B) onto a clean, non-marring surface. Attach Right Armrest/Leg(B) to Backrest(D) and Seat(C) using Bolts(②) and Washers(⑤) with Allen Key(①). Do not fully tigthen Bolts. Step 4 Stand the Single Chair rightside up. Attach Left Armrest(A) and Right Armrest(B) to the Chair Back(D) using Bolts(④) and Washers(⑤) with Allen Key(①) as shown in the picture above. Do not fully tigthen Bolts.
Step 5 Place the Single Chair on a LEVEL SURFACE to check for wobbles. If it wobbles, lift the Single Chair some 20cm to 30cm high from the ground. Keep your feet and toes well away from the drop zone. Drop the Single Chair freely and vertically with all four legs, hitting the ground, all at the same time. This Drop Test will help to ensure that all the Bolts and gaps reach full alignment status. Test again for evenness on a LEVEL SURFACE.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.
Caution: You must read this before you proceed Loveseat Label Picture Description QTY A Left Armrest / Leg 1 B Right Armrest / Leg 1 C Seat 1 D Backrest 1 E Seat Cushion 1 1 OF 6
Label Picture ① ② ③ ④ ⑤ Description QTY Allen Key 1 Bolt M6*25mm Bolt M6*35mm Bolt M6*60mm Washer 8 2 2 12 Before Beginning Assembly: 2 OF 6
OVERVIEW Backrest(D) Right Armrest / Leg(B) Left Armrest / Leg (A) Seat Cushion (E) Chair Seat (C) FRONT FACING This Loveseat has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Loveseat parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts onto a clean, non-marring surface.
Step 2 Place the Left Armrest/Leg(A) onto a clean, non-marring surface. Attach the Left Armrest/Leg(A) to Backrest(D) and Seat(C) using Bolts(②) and Washers(⑤) with Allen Key(①). Do not fully tigthen Bolts. Step 3 Place the Right Armrest/Leg(B) onto a clean, non-marring surface. Attach Right Armrest/Leg(B) to Backrest(D) and Seat(C) using Bolts(②) and Washers(⑤) with Allen Key(①). Do not fully tigthen Bolts. Step 4 Stand the Loveseat rightside up.
Step 5 Place the Loveseat on a LEVEL SURFACE to check for wobbles. If it wobbles, lift the Loveseat some 20cm to 30cm high from the ground. Keep your feet and toes well away from the drop zone. Drop the Loveseat freely and vertically with all four legs, hitting the ground, all at the same time. This Drop Test will help to ensure that all the Bolts and gaps reach full alignment status. Test again for evenness on a LEVEL SURFACE. If no wobbles are found, slowly and steadily, place the Loveseat facedown.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.
Caution: You must read this before you proceed Coffee Table Label Picture Description QTY A Leg 2 B Support Panels 2 C Table Top 1
Label Picture Description QTY ① Allen Key 1 ② Bolt M6*25mm 10 ③ Washer 10 Before Beginning Assembly:
Overview Table Top (C) Support Panels (B) Leg (A) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts on a clean, non-marring surface.
Step 2 Attach Support Panels(B) to Table Top(C) using Bolts(②) and Washers(③) with Allen Key(①) as pictured above. Attach Support Panels(B) to Table Leg(A) using Bolts(②) and Washers(③) with Allen Key(①) as pictured above. Do not fully tigthen Bolts. Step 3 Attach the other Leg(A) to the Table Top(C) and Support Panels(B) using Bolts(②) and Washers(③) with Allen Key(①) as pictured above. Do not fully tigthen Bolts.
Step 4 Turn the Table right way up. Place the Table on a LEVEL SURFACE to check for wobbles. If it wobbles, lift the Table some 20cm to 30cm high from the ground. Keep your feet and toes well away from the drop zone. Drop the Table freely and vertically with all four legs, hitting the ground, at the same time. This Drop Test will help to ensure that all the Bolts and gaps reach full alignment status. Test again for evenness on a LEVEL SURFACE.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.