Product Guide
Table Of Contents
- XS-2426G-A Product Guide
- Legal notice
- Contents
- List of tables
- List of figures
- About this document
- 1 What’s new
- 2 ETSI ONT safety guidelines
- 3 ETSI environmental and CRoHS guidelines
- 4 ANSI ONT safety guidelines
- 5 XS-2426G-A unit data sheet
- 5.1 Overview
- 5.2 XS-2426G-A part numbers and identification
- 5.3 XS-2426G-A general description
- 5.4 XS-2426G-A software and installation feature support
- 5.5 XS-2426G-A interfaces and interface capacity
- 5.6 XS-2426G-A LEDs
- 5.7 XS-2426G-A detailed specifications
- 5.8 XS-2426G-A GEM ports and T-CONTs
- 5.9 XS-2426G-A performance monitoring statistics
- 5.10 XS-2426G-A functional blocks
- 5.11 XS-2426G-A standards compliance
- 5.12 XS-2426G-A special considerations
- 6 Install a XS-2426G-A indoor ONT
- 7 Replace a XS-2426G-A indoor ONT
- 8 Configure a XS-2426G-A indoor ONT
- 8.1 Overview
- GUI configuration
- Viewing device information and connection status
- 8.5 Overview
- 8.6 Viewing device information
- 8.7 Viewing LAN status
- 8.8 Viewing WAN status
- 8.9 Viewing WAN IPv6 status
- 8.10 Viewing STA information
- 8.11 Viewing Neighboring Access Points
- 8.12 Viewing home networking information
- 8.13 Viewing optics module status
- 8.14 Viewing statistics
- 8.15 Viewing voice information
- Network configuration
- 8.16 Overview
- 8.17 Configuring LAN
- 8.18 Configuring LAN IPv6
- 8.19 Configuring WAN
- 8.20 Configuring WAN DHCP
- 8.21 Configuring Wireless 2.4GHz
- 8.22 Configuring Wireless 5GHz
- 8.23 Configuring wireless scheduling
- 8.24 Configuring IP routing
- 8.25 Configuring DNS
- 8.26 Configuring TR-069
- 8.27 Configuring GRE tunnel
- 8.28 Configuring Upstream (US) Classifier
- 8.29 Configuring QoS
- Security configuration
- Configuring the Application
- Maintenance
- 8.46 Overview
- 8.47 Configuring the password
- 8.48 Configuring LOID
- 8.49 Configuring SLID
- 8.50 Managing the device
- 8.51 Backing up the configuration
- 8.52 Restoring the configuration
- 8.53 Upgrading firmware
- 8.54 Rebooting the device
- 8.55 Resetting to factory defaults
- 8.56 Diagnosing WAN connections
- 8.57 Viewing log files
- RG Troubleshooting Counters
- 9 ONT configuration file over OMCI
• Wavelength: 1577 nm downstream; 1270 nm upstream
• Supports WBF filter.The GPON ONTs can co-exist with XGSPON ONTs in the same PON.
• Line rate: 9.953 Gb/s downstream and upstream
• 2 inner antennas for 2.4G, 2 inner antennas for 5G
• Optics that support received signal strength indication (RSSI)
• Wireless 2.4 GHz 802.11b/g/n/ax 2x2 MIMO
• Wireless 5 GHz 802.11a/n/ac/ax 2x2 MU-MIMO
• 64/128 WEP encryption
• WPA, WPA-PSK/TKIP
• WPA2, WPA2-PSK/AES
• WPA3, WPA3-SAE
• VLAN tagging/detagging and marking/remarking of IEEE 802.1p per Ethernet port.
• Dying gasp support
• Voice Services via Session Initiation Protocol (SIP)
• Multiple voice Code
• DTMF dialing
• Echo cancellation (G.168)
• Fax mode configuration (T.30/T.38)
• Caller ID, call waiting, call hold, 3-way calling, call transfer, message waiting
• Forward Error Correction (FEC)
• support for multiple SSIDs (private and public instances); contact your Nokia representative for
further details.
• Conductive power: 250mW/24dBm (2.4GHz); 500mW/27dBm (5GHz)
• Maximum effective isotropic radiated power (EIRP): 500mW/27 dBm (2.4 GHz); 1000 mW/30
dBm (5GHz)
• Bridged mode or routed mode per LAN port
• Ethernet-based Point-to-Point (PPPoE)
• DHCP client/server
• DNS server/client
• DDNS
• Port forwarding
• Network Address Translation (NAT)
• Network Address Port Translation (NAPT)
• UPnP IGD2.0 support
• ALG
• IGMP snooping and proxy (v2/v3)
• Traffic classification and QoS capability
XS-2426G-A unit data sheet
XS-2426G-A general description
Nokia ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA
December 2020
44 Issue 1