Product Guide
Table Of Contents
- XS-2426G-A Product Guide
- Legal notice
- Contents
- List of tables
- List of figures
- About this document
- 1 What’s new
- 2 ETSI ONT safety guidelines
- 3 ETSI environmental and CRoHS guidelines
- 4 ANSI ONT safety guidelines
- 5 XS-2426G-A unit data sheet
- 5.1 Overview
- 5.2 XS-2426G-A part numbers and identification
- 5.3 XS-2426G-A general description
- 5.4 XS-2426G-A software and installation feature support
- 5.5 XS-2426G-A interfaces and interface capacity
- 5.6 XS-2426G-A LEDs
- 5.7 XS-2426G-A detailed specifications
- 5.8 XS-2426G-A GEM ports and T-CONTs
- 5.9 XS-2426G-A performance monitoring statistics
- 5.10 XS-2426G-A functional blocks
- 5.11 XS-2426G-A standards compliance
- 5.12 XS-2426G-A special considerations
- 6 Install a XS-2426G-A indoor ONT
- 7 Replace a XS-2426G-A indoor ONT
- 8 Configure a XS-2426G-A indoor ONT
- 8.1 Overview
- GUI configuration
- Viewing device information and connection status
- 8.5 Overview
- 8.6 Viewing device information
- 8.7 Viewing LAN status
- 8.8 Viewing WAN status
- 8.9 Viewing WAN IPv6 status
- 8.10 Viewing STA information
- 8.11 Viewing Neighboring Access Points
- 8.12 Viewing home networking information
- 8.13 Viewing optics module status
- 8.14 Viewing statistics
- 8.15 Viewing voice information
- Network configuration
- 8.16 Overview
- 8.17 Configuring LAN
- 8.18 Configuring LAN IPv6
- 8.19 Configuring WAN
- 8.20 Configuring WAN DHCP
- 8.21 Configuring Wireless 2.4GHz
- 8.22 Configuring Wireless 5GHz
- 8.23 Configuring wireless scheduling
- 8.24 Configuring IP routing
- 8.25 Configuring DNS
- 8.26 Configuring TR-069
- 8.27 Configuring GRE tunnel
- 8.28 Configuring Upstream (US) Classifier
- 8.29 Configuring QoS
- Security configuration
- Configuring the Application
- Maintenance
- 8.46 Overview
- 8.47 Configuring the password
- 8.48 Configuring LOID
- 8.49 Configuring SLID
- 8.50 Managing the device
- 8.51 Backing up the configuration
- 8.52 Restoring the configuration
- 8.53 Upgrading firmware
- 8.54 Rebooting the device
- 8.55 Resetting to factory defaults
- 8.56 Diagnosing WAN connections
- 8.57 Viewing log files
- RG Troubleshooting Counters
- 9 ONT configuration file over OMCI
Table 5-5 XS-2426G-A indoor ONT LED descriptions
Indicator LED color and
behavior
LED behavior description
Power Green solid
Red solid
Off
Power on
Light failed on startup (for example corrupt flash), or self test failed on startup, or self test
failed during regular operation or when executed over OMCI
Power off
Link Green solid
Off
GPON link between ONT and OLT is operating normally
GPON link is down or no link is connected
Auth Off
Green solid
Green flashing
Fiber is not connected or no power is received to the ONT
ONT is configured on the OLT and is in service (UP)
ONT is in the process of ranging or synchronizing over the OLT
ONT is ranged but not configured on the OLT
ONT is configured on OLT but admin is down and the ONT is out of service
ONT is in service and subsequently un-configured on the OLT
ONT is in service while other services are being configured
ONT is in service but admin is down and the ONT is out of service
LAN 1 to 4 Green solid
Green flashing
Off
ONT is connected to the associated LAN port (includes devices with wake-on-LAN capability
where a slight voltage is supplied to an Ethernet connection)
LAN activity is present (traffic in either direction)
ONT power is off or Ethernet is not connected
TEL 1 to 2 Green solid
Green flashing
Off
Phone is off hook.
Phone is in ‘call in’ or ‘talking’ condition
All phones are on hook
VOIP Green solid
Off
VoIP service is built up and can provide service
VoIP service is not built up or out of service
WPS Green solid
Green flashing
Red solid
Off
WiFi protected setup link is up (negotiation and auto-configuration successful)
WiFi protected setup link activity (negotiation and auto-configuration ongoing)
WiFi protected setup processing exception or multiple peers using WPS simultaneously
WiFi protected setup link down or no link connected (negotiation has not started or has
failed)
WLAN 2.4
GHz
Green solid
Green flashing
Off
WLAN link is enabled in 2.4 GHz
Traffic is passing through the WLAN link
WLAN link is disabled or no link is connected
WLAN 5 GHz Green solid
Green flashing
Off
WLAN link is enabled in 5 GHz
Traffic is passing through the WLAN link
WLAN link is disabled or no link is connected
USB Green solid
Green flashing
Off
At least one device is connected to the USB port
There is traffic activity on at least one device connected to the USB port
No device is connected to the USB port
XS-2426G-A unit data sheet
XS-2426G-A LEDs
Nokia ONT
Draft Draft
December 2020
Issue 1 51
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA