Product Guide

1
Deactivate the ONT services at the P-OLT.
If you are using the SLID feature, this step is not required. The ONT and the services can
remain in service (IS).
a. Use the RTRV-ONT command to verify the ONT status and th associated services. Record
the serial number or the SLID of the ONT displayed in the command output.
Example:
RTRV-ONT::ONT-1-1-1-1-1;
b. If the ONT is in service, place the ONT in OOS state.
Example:
ED-ONT::ONT-1-1-1-1-1;
2
If used, disable the Wi-Fi service by pressing the WLAN button; see Figure 7-1, “XS-2426G-A
indoor ONT connections” (p. 68) for the location of the WLAN button.
Figure 7-1 XS-2426G-A indoor ONT connections
ON/OFF RESET WLAN
POWER
LAN4LAN3LAN2LAN1TEL2TEL1
LEDWPS
36553
POTS port
(RJ-11)
Ethernet
ports (4)
(RJ-45)
Power
Reset
button
Wi-Fi
security/
on/off buttons
On/off
button
USB
port
Fiber optic
port
USB
Replace a XS-2426G-A indoor ONT
Procedure
Nokia ONT
Draft Draft
December 2020
Issue 1 69
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA