User Manual

6
2
PLUGGING IN THE RSU
You can connect the RSU directly to a computer, or you can connect
it to a small office/home office (SOHO) network.
• If you are directly connecting the RSU to your computer, com-
plete the steps in this section.
• If you are connecting the RSU to a network, refer to the section
“Connecting the RSU to a network” on page 19 in this guide.
To plug in the RSU:
1 On the bottom of the RSU, locate the Ethernet jack. Plug one
end of the Ethernet cable into the Ethernet jack (Figure 2).
2 Connect the RSU’s AC power cord to the power source, then
plug the power cord into a wall outlet. Plug the power source cord
into the bottom of your RSU (Figure 2).
Figure 2: Ethernet jack and power cord connector on bottom of
RSU
Ethernet cable jack
Power cord connector