User Manual

USING THE INDICATOR LIGHTS TO FIND THE

STRONGEST SERVICE PROVIDER SIGNAL

You can find the strongest service provider signal by using the lights

on top of the RSU (Figure 6). You can use this method regardless of

the operating system your computer runs.

The indicator lights indicate the strength of the signal received while

the RSU is in its current orientation. The stronger the signal, the more

lights on the RSU blink on and off. The strongest signal may be

indicated by one or two lights lit. Even though not all five lights are

lit, this level of signal is strong enough for full-speed operation.

To use the lights to find the strongest service provider signal:

1 Before you begin, make sure:

• Your computer is turned off.

• The RSU’s power cord is connected to the RSU and to a

power source. If your RSU has power, the lights on the RSU

blink on and off.

• The Ethernet cable is

connected to the RSU. The other end

of the Ethernet cable is not connected to the computer.

Figure 6: Location of lights on RSU

Lights on RSU