User Manual

11
2 Set your RSU on a table or shelf in the location you’ve chosen.
The RSU must be in an upright position.
3 Point the front of the RSU directly toward the window.
4 Remove your hands from the RSU. Keep the RSU stationary, in
this orientation, for about five seconds.
The blinking lights indicate the strength of the signal received.
The stronger the signal, the more lights on the RSU blink on and
off. Figure 7 illustrates blinking lights.
5 Point the front of the RSU to the right of the starting position.
Remove your hands from the RSU, and let it stand still for
about five seconds.
Figure 7: Indicator lights blinking: signal found
Lights blink on
Lights blink off
Lights blink on