User Manual

13
3B
USING THE SOFTWARE-ASSISTED METHOD TO FIND
THE STRONGEST SIGNAL
Note: The software-assisted method is available only to users who
use Windows (versions later than 3.11) as their operating system.
To use the software program to help you search for the strongest
service provider signal in your area:
1 Install and start the LinkMonitor™ program.
2 Find the strongest service provider signal.
Each task is explained in greater detail in the sections that follow.
Installing and starting the LinkMonitor program
1 If your computer is not powered on, power it now.
2 Make sure the Ethernet cable and power cable are connected to
the RSU.
3 Plug the other end of the Ethernet cable into your computer.
4 Locate the software CD supplied with your RSU.
5 Insert the CD into your computer’s CD drive. If the installation
program does not start automatically, start it by clicking on the
Setup.exe icon.
Follow the instructions in the dialog boxes to complete the
installation of the LinkMonitor program.
6 After the software is installed, a blue RSU icon appears in your
system tray (Figure 8).
To run the LinkMonitor program, right click on the icon, and
select Open.
Figure 8: Starting the LinkMonitor program
LinkMonitor program’s icon in
system tray