User Manual

17
4 Point the RSU toward the direction it was facing—either to the
left or to the right of the starting point—when the most lights
were blinking.
5 Plug the Ethernet cable back into the computer.
6 Refresh your IP address by performing the procedure described
in the section “Refreshing the RSU’s connection” on page 18.
5
CONNECTING TO THE INTERNET
After completing steps 1 through 4, you should be able to connect to
the Internet.
1 Start your Internet browser, and try to open a few Internet sites.
• If you can open numerous sites, enjoy your new, high-speed
service.
• If you cannot open any sites—for example, if your browser
displays a message “This page cannot be displayed” for all the
sites you tried to access—refresh the RSU’s connection, as
described in the section “Refreshing the RSU’s connection”
on page 18 in this guide.