User guide

-
-
I
I
N
N
D
D
E
E
X
X
-
-
09/12 Rev. B 143573
2
1 GENERAL INSTRUCTIONS ON DELIVERY ……………………………………3
 GENERAL INSTRUCTIONS ……………………………………………………………………3
 TECHNICAL DATA ………………………………………………………………………………3
 LIST OF REGULATION REFERENCES ……………………………………………………3
 GENERAL INSTRUCTIONS ……………………………………………………………………3
 SETTING UP ………………………………………………………………………………………4
MACHINE LOADING …………………………………………………………………………………………………5
POSITION OF TRAYS ………………………………………………………………………………………………5
STORAGE TIME AND TEMPERATURE …………………………………………………………………………5
CORE PROBE ………………………………………………………………………………………………………6
2 CONTROL PANEL …………………………………………………………………7
 DESCRIPTION OF CONTROLS ………………………………………………………………7
3 OPERATION ..……………………….………………………………………………10
 PROGRAMS .…………………….………………………………………………………………10
IFR CHILLING CYCLE ………….………….………………………………………………………………………10
RECOMMENDED WORKING CYCLES ………………….………………………………………………………11
USER’S CYCLE …………………………………………….………………………………………………………11
User’s programs ..…………….………………………………………………………………………………11
Storing User’s programs ………..……………………………………………………………………………12
Delete a User’s programs ……………………………………………………………………………………13
Rename a User’s programs …....……………………………………………………………………………13
PRE-COOLING CYCLE ……………………………………………………………………………………………14
 MANUAL CYCLES .…………….………………………………………………………………15
Negative freezing cycle with core probe …………………………………………………………………16
Negative freezing cycle with timer …………………………………………………………………………16
Soft positive chilling cycle with core probe ………..……………………………………………………17
Soft positive chilling cycle with timer ……………….……………………………………………………18
Hard positive chilling cycle with core probe ………….…………………………………………………18
Hard positive chilling cycle with timer ……………………………………………………………………19
 STORING CYCLES …………...………………………………………………………………20
POSITIVE STORE ………………………….………………………………………………………………………20
NEGATIVE STORE ………………………………………..………………………………………………………20
 DEFROSTING ………………………….………………………………………………………21
 PRINTING …………………………………….…………………………………………………21
4 MAINTENANCE ……………………………………………………………………23
 MAINTENANCE AND CLEANING ……………………………………………………………23
CLEANING THE CABINET …………………………………………………………………………………………23
CLEANING THE AIR CONDENSER ……………………………………………………………………………24
STAINLESS-STEEL MAINTENANCE ……………………………………………………………………………24
DISCONTINUED USE ……………………………………………………………………………………………25

INSTALLATION …………………………………………………………………………………26
INTRODUCTION ……………………………………………………………………………………………………26
MAX ROOM TEMPERATURE ……………………………………………………………………………………26
LOCATION ….………………………………………………………………………………………………………26
WIRING ………………………………………………………………………………………………………………28
CONNECTION TO CONDENSATE DRAIN ……………………………………………………………………28
TESTING ……………………………………………………………………………………………………………28
 CLOCK SETTING ………………………………………………………………………………29
 LANGUAGE …….………………………………………………………………………………29
 ALARMS AND FAULT ANALYSIS …………………………………………………………30
 SERVICE ……………..…………………………………………………………………………32
PARAMETERS ………………………………………………………………………………………………………32
Description of parameters ……………………………………………………………………………………32
Changing parameters ………………………………………………………………………………………34
RESET MEMORY …………………………………………………………………………………………………35
RESTORING DEFAULT PARAMETERS …………..……………………………………………………………36
 INPUTS/OUTPUTS ………………………….…………………………………………………37
 PRINTER INSTALLATION ………………………..…………………………………………37
 MAINTENANCE OF PANEL BOARD ………………………………………………………38
 WIRING DIAGRAM PLATE …………………………………………………………………39
 CONTROL AND SAFETY SYSTEMS ………………………………………………………39
 DISPOSAL ………………………………………………………………………………………39
 DOOR REVERSAL ……………………………………………………………………………40
 REFRIGERANT MATERIAL SAFETY DATA SHEET………………………………………40
 DIMENSIONS …………………………………………………………………………………42
APPENDIX …………………………………………………………………………44