PULSE Display Kit – Pull Type Installation Manual PULSE-PT01
Printed in Canada Copyright 2010 by NORAC Systems International Inc. Reorder P/N: PULSE-PT01-INST Rev B (PULSE Display Kit – Pull Type) NOTICE: NORAC Systems International Inc. reserves the right to improve products and their specifications without notice and without the requirement to update products sold previously. Every effort has been made to ensure the accuracy of the information contained in this manual. The technical information in this manual was reviewed at the time of approval for publication.
Contents 1 INTRODUCTION..................................................................................................... 2 1.1 List of Parts ..........................................................................................................................................................................2 1.2 Optional RAM Mount Ordering Information ...............................................................................................................2 2 TECHNICAL SPECIFICATIONS ........
1 Introduction The PULSE™ Display Kit Manual is intended to be used in conjunction with the UC5™ Spray Height Control Installation Manual. This manual provides instructions to interface the UC5 Control Module to the PULSE Display. For installation of the rest of the UC5 Spray Height Control System please refer to the sprayer specific manual provided with the kit.
2 Technical Specifications CAN ICES-3(A)/NMB-3(A) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
3 Installation Ensure the PULSE power switch is OFF for the remainder of the installation (Bottom of switch pressed IN). 1. Install the PULSE™ display in the cab of the sprayer where it will be clearly visible and within easy reach of the operator. 2. RAM manufactures a suction cup mount that works well for installing the PULSE display. The suction cup mount is not supplied with this kit, but is available from NORAC or RAM. See Section 1.2 for ordering information. 3.
Figure 1: PULSE Pull Type Display Kit Parts 5
4 Cable Drawings 4.1 ITEM C01: 43220-01 - CABLE UC5 NETWORK 14 AWG - 1M 4.
Canada NORAC Systems International Inc. Phone: (+1) 306 664 6711 Toll Free: 1 800 667 3921 Shipping Address: 3702 Kinnear Place Saskatoon, SK S7P 0A6 United States NORAC, Inc. Phone: (+1) 952 224 4142 Toll Free: 1 866 306 6722 Shipping Address: 6667 West Old Shakopee Road, Suite 111 Bloomington, MN 55438 Europe NORAC Europe Phone: (+33) (0)4 26 47 04 42 Shipping Address: Rue de l’hermitage 01090 GUEREINS France www.norac.
