Supplementary Document

SAFETY
Read and understand the plow instructions,
Warranty & FAQ and Tips before use.
Scan the QRC instructional videos on the rst
page or watch the videos on our website before
use: www.nordicplow.com
Always instruct other users before they use
the plow.
OPERATION
Risk of Injury:
• Never allow children to handle the plow.
• Never allow anyone to walk beside or sit on
the plow when in use.
ª Never operate the plow over 2 to 3 mph.
Keep a slow steady speed.
• If you hit an obstruction, immediately stop
the vehicle and reverse direction.
STEP 1 & 2: The side universal mounting plate (part
#77) has 4 sides with various combinations of holes to
line up with those already on the mower. In the rare
case where the holes do not match, it is okay to drill
holes in the mount plate to t your frame.
NOTE: Holes must be identical on both sides.
STEPS 3: There are many ways to attach the boot plate
(part #76) to the mount plates (part #77). The closer the
boot plates are to the machine the better.
STEP 5: A left-sided mount of the handle is shown.
Place bracket (part #75) on the other side if a right
side handle is preferred. Use the axle (part #46) as a
guide before tightening bolts to help keep the holes
on center.
STEP 6: Be sure to include the thick spacers (part #41)
onto the axle and in between the boot plate (part #76)
and the Spring Pivot Bracket (part #10).
1-888-662-7569 (PLOW)
771 W. North Avenue West Chicago, IL 60185
www.nordicplow.com
INSTRUCTIONS FAQS & TIPS
2