Operation Manual

15
12. With the help of a second person, hold the con-
sole assembly near the right Handrail (86).
Make sure that the Upright Wire (81) is inserted
through the two looped Cable Ties (99).
Route the Upright Wire (81) as shown, and insert
the Upright Wire into the gap indicated by the
arrow.
Console
Assembly
99
99
81
12
86
13. Set the console assembly on the brackets on
the Handrails (86). Be careful not to pinch any
wires.
Attach the console assembly with the four 1/4"
x 1/2" Screws (31) that you removed in step 10
and four 1/4" Star Washers (32). Start all four
Screws, and then tighten them.
13
86
86
31
32
Console
Assembly
31
32