Operation Manual

CONTRAST LVL—Press the Incline increase and

decrease buttons to adjust the contrast level of the

display.

If a module is connected, you may also select

the following screen:

AUDIO COACH—To turn on or turn off the audio

coach, press the Enter button.

DEFAULT MENU—The default menu will appear

when you insert the key into the console or when

you press the Home button. Press the Enter button

repeatedly to select the manual main screen or the

iFit screen as the default menu.

CHECK WIFI STATUS—Press the Enter button

to check the status of your iFit module. The lower

display will show the software version number, the

network SSID, the network encryption type, the

connection status, the wireless signal strength, the

IP address of the module, the number of registered

users and their names, the results of the DNS

lookup, and the status of the iFit server.

SEND/RECEIVE DATA—To send and receive

workouts, workout logs, and updates, press the

Enter button. When the process is ﬁ nished, the

words TRANSFERS DONE will appear in the

display.

3. Exit the settings mode.

To exit the settings mode, remove the key from the

console.

HOW TO ADJUST THE CUSHIONING SYSTEM

The treadmill features a cushioning system that

reduces the impact as you walk or run on the treadmill.

Remove the key from the console and unplug the

power cord. In order to adjust the cushions, you may

need to place the treadmill in the storage position (see

HOW TO FOLD THE TREADMILL on page 30).

For more ﬁ rmness, turn a cushion to the position

shown in drawing 1; for less ﬁ rmness, turn the cushion

to the position shown in drawing 2. Adjust the other

cushions in the same way. Note: Make sure that the

cushions on the left and right sides of the treadmill

are set to the same firmness level. The faster you

run on the treadmill, or the more you weigh, the

firmer the walking platform should be.

More firm

Less firm

1 2