Installation Guide

15
Step Installation Procedure(ex. @Garage)
Necessary Tool
13 Use a marker to mark the cutting position.
14
Attach "①Universal Rain Cap"
①
Universal
Rain Cap
Step-2
(Work on rooftop)
All cuts must be made at right angle to the pipe. All field cuts must be deburred.
 Take precaution not to drop debris into " ③ Flex Pipe 2"". In case debris is dropped,
remove from the lower end of the " ③ Flex Pipe 2"".
Mark
3 ribs
Completely Insert "①Universal Rain Cap" into the "③Flex Pipe 2"",
"①Universal Rain Cap" overlap "④B-Vent" by 1/2".
Be sure to do
More
than
1/2”
}
PVC Cutter
Box Cutter
or