Installation Guide

Table Of Contents

INSTALLATION

CAUTION: Read all instructions before installing

INSTALLATION LOCATION

The ice maker should be installed in a proper location meeting the following conditions:

• Indoors, not more than 6,560 ft (2,000 meters) above sea level.

• Ambient temperature: 40° - 104°F (5-40°C). For optimal ice making performance, operate in ambient temperatures between 60°F - 80°F (16°C - 27°C).

• Properly installed and grounded power supply that matches the rated voltage indicated on the machine nameplate.

• Water source: potable water, with water pressure from 1.3 Bar to 5.5 Bar; water temperature: 40° - 95°F (5-35°C). For optimal ice making

performance, operate with water temperature between 45°F - 55°F (7°C - 13°C)

• The ice machine should be kept away from heat sources, and should not be used in an extremely high or low temperature environment, and

away from direct sunlight.

• The ice machine must be placed on a floor sufficient to support its weight when filled with water or ice.

• The electrical outlet for the ice maker must be properly grounded and with leakage protection;

• Proper floor drainage must be provided near the installation location of the ice machine.

ELECTRICAL SUPPLY

ALWAYS make sure that the unit is plugged into a properly installed and grounded dedicated outlet that meets the requirements listed on the

ratings label and that has appropriate overcurrent protection. Voltage that is too high or too low can detrimentally affect the operation of, or

damage, the unit.

DO NOT modify or cut the power cord, or use any other plug or an extension cord.

INSTALLATION SCHEMATIC