User Guide

100 Chapter 3 Managing the network access devices
320818-A
Mapping VLANs by switch
To map VLANs by switch, you must first disable the network access device (see
“Managing network access devices using the SREM” on page 91). Once the
network access device is disabled, select the Secure Access Domain > domain >
Switches > switch > VLANs tab.
The switch VLANs screen appears (see Figure 10), listing all current VLANs
applied to the switch.
Figure 10
Switch VLANs screen
This screen allows you to manage VLANs on the switch by adding or deleting
entries in the VLAN Table. For detailed steps on adding or removing switch
VLANs, see:
• “Adding VLANs to a switch” on page 101