User Guide

Chapter 3 Managing the network access devices 101
Nortel Secure Network Access Switch 4050 User Guide
• “Removing VLANs from a switch” on page 102
Adding VLANs to a switch
To add VLANs to a switch, complete the following steps:
1 Select the Secure Access Domain > domain > Switches > switch > VLANs
tab.
The switch VLANs screen appears (see Figure 10 on page 100).
2 Click Add.
The Add a new VLAN dialog box appears (see Figure 11).
Figure 11
Add a new VLAN
3 Enter the VLAN information in the applicable fields. Table 5 describes the
Add a new VLAN fields.
4 Click Add.
The new VLAN appears in the VLAN Table.
5 Repeat this step for each Green and Yellow VLAN configured on the network
access device.
6 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Table 6
Add a new VLAN fields
Field Description
Name The name of the VLAN, as configured on the switch.
ID The ID of the VLAN, as configured on the switch.