User Guide

124 Chapter 4 Configuring the domain
320818-A
Depending on the options you select in connection with certificates and creating a
test user, the two wizards also create similar default settings (see “Settings created
by the quick setup wizard” on page 60).
You can later modify all settings created by the domain quick setup wizard (see
“Configuring domain parameters using the CLI” on page 130).
1 Launch the domain quick setup wizard.
2 Specify the pVIP of the Nortel SNAS 4050 domain.
You can configure additional pVIPs later (see “Configuring domain
parameters using the CLI” on page 130).
3 Specify a name for the Nortel SNAS 4050 domain, as a mnemonic aid.
4 Specify the port on which the portal web server listens for SSL
communications. The default for HTTPS communications is port 443.
5 Specify the certificate to be used by the portal server.
If certificates exist on the system, the certificate numbers will be offered as
valid input options. Choose one of the following:
a To create a new certificate by pasting in the contents of a certificate file
from a text editor, press Enter to accept the default value (
no). Go to step
6 on page 125.
b To create a test certificate, press Enter to accept the default value (
no).
Go to step 7 on page 125.
>> Main# cfg/quick
IP address of domain portal: <IPaddr>
Name of the domain: <name>
Listen port of domain portal [443]:
Use existing certificate (no/1) [no]: