User Guide

Chapter 4 Configuring the domain 125
Nortel Secure Network Access Switch 4050 User Guide
c To use an existing certificate, enter the applicable certificate number. Go
to step 8 on page 126.
Use the
/info/certs command to view the main attributes of all configured
certificates. The certificate number is shown in the Certificate Menu line (for
example,
Certificate Menu 1:).
For more information about certificates and keys, see “Managing certificates”
on page 569.
6 To create a new certificate:
a At the prompt to create a test certificate, enter
No.
b When prompted, paste in the certificate and key from a text file, then
press Enter.
c Enter an ellipsis (
...) to signal the end of the certificate.
d To continue, go to step 8 on page 126.
7 To create a test certificate:
a At the prompt to create a test certificate, enter
Yes.
b When prompted, enter the required certificate information. For more
information, see “Generating and submitting a CSR using the CLI” on
page 579.
Use existing certificate (no/1) [no]:
Create a test certificate? (yes/no): no
Enter server certificate.
Paste the certificate and key, press Enter to create a new
line, and then type "..." (without the quotation marks)
to terminate.
>