User Guide

130 Chapter 4 Configuring the domain
320818-A
Configuring domain parameters using the CLI
To configure the domain, use the following command:
/cfg/domain <domain ID>
where domain ID is an integer in the range 1 to 256 that uniquely identifies the
domain in the Nortel SNAS 4050 cluster.
The Domain menu displays.
The Domain menu includes the following options:
/cfg/domain <domain ID>
followed by:
name <name>
Names or renames the domain.
• name is a string that must be unique in the domain.
The maximum length of the string is 255
characters.
The name is a mnemonic aid only and is not used by
other functions.
pvips <IPaddr>
Sets the pVIP for the domain. The pVIP is the portal
address to which clients connect in order to access the
Nortel SNA network. For more information, see “About
the IP addresses” on page 51.
A domain can have more than one pVIP. To configure
multiple IP addresses for the portal, use a comma to
separate the IP address entries.
aaa
Accesses the AAA menu, in order to configure
authentication, authorization, and accounting features.
• For authentication, see “Configuring authentication”
on page 233.
• For authorization, see “Configuring groups and
profiles” on page 191 and “Configuring the
TunnelGuard check using the CLI” on page 132.
• For accounting, see “Configuring RADIUS
accounting using the CLI” on page 146.
server
Accesses the Server menu, in order to configure the
portal SSL server (see “Configuring the SSL server
using the CLI” on page 135).