User Guide

Chapter 4 Configuring the domain 137
Nortel Secure Network Access Switch 4050 User Guide
The Trace menu displays.
The Trace menu includes the following options:
/cfg/domain #/server/trace
followed by:
ssldump
Creates a dump of the SSL traffic flowing between
clients and the portal server. You are prompted to enter
the following information:
•
ssldump flags and ssldump filter — for
more information about the flags and filter
expressions available for SSLDUMP using UNIX,
see http://www.tcpdump.org/tcpdump_man.html.
•
output mode
Options for the output mode are:
•
interactive — captured information displays
decrypted on the screen. SSLDUMP cannot
decrypt any traffic if it is started after the browser.
SSLDUMP must be running during the initial SSL
handshake.
•
tftp|ftp|sftp — the dump will be saved as a
file to the file exchange server you specify, using a
destination file name you specify. You are prompted
to enter the required information. You can specify
the file exchange server using either the host name
or the IP address.
For TFTP, the number of files sent depends on the
amount of captured information. A sequence
number is appended to the file name given in the
CLI, starting at 1 and incremented automatically for
additional files.
For
ftp and sftp, you will also be prompted to
specify a user name and password valid on the file
exchange server.
The default output mode is
interactive.