User Guide

Chapter 4 Configuring the domain 147
Nortel Secure Network Access Switch 4050 User Guide
When you add an external RADIUS accounting server to the configuration, the
server is automatically assigned an index number. Nortel SNAS 4050 accounting
will be performed by an available server with the lowest index number. You can
control accounting server usage by reassigning index numbers (see “Managing
RADIUS accounting servers using the CLI” on page 147).
To configure the Nortel SNAS 4050 to support RADIUS accounting, use the
following command:
/cfg/domain #/aaa/radacct
The Radius Accounting menu displays.
The Radius Accounting menu includes the following options:
Managing RADIUS accounting servers using the CLI
To configure the Nortel SNAS 4050 to use external RADIUS accounting servers,
use the following command:
/cfg/domain #/aaa/radacct/servers
The Radius Accounting Servers menu displays.
/cfg/domain #/aaa/radacct
followed by:
servers
Accesses the Radius Accounting Servers menu, in
order to configure external RADIUS accounting servers
for the domain (see “Managing RADIUS accounting
servers using the CLI” on page 147).
vpnattribu
Accesses the VPN Attribute menu, in order to
configure Nortel SNAS 4050-specific attributes to be
sent to the accounting server (see “Configuring Nortel
SNAS 4050-specific attributes using the CLI” on
page 149).
ena
Enables RADIUS accounting.
The default is disabled.
dis
Disables RADIUS accounting.
The default is disabled.