User Guide

148 Chapter 4 Configuring the domain
320818-A
The Radius Accounting Servers menu includes the following options:
/cfg/domain #/aaa/radacct/servers
followed by:
list
Lists the IP addresses of currently configured RADIUS
accounting servers, by index number.
del <index number>
Removes the specified RADIUS accounting server
from the current configuration. The index numbers of
the remaining entries adjust accordingly.
To view the index numbers of all configured RADIUS
accounting servers, use the
list command.
add <IPaddr> <port>
<shared secret>
Adds a RADIUS accounting server to the configuration.
You are prompted to enter the following information:
•
IPaddr — the IP address of the accounting server
•
port — the TCP port number used for RADIUS
accounting. The default is 1813.
•
shared secret — the password used to
authenticate the Nortel SNAS 4050 to the
accounting server
The system automatically assigns the next available
index number to the server.
insert <index number>
<IPaddr>
Inserts a server at a particular position in the list of
RADIUS accounting servers in the configuration.
•
index number — the index number you want
the server to have
•
IPaddr — the IP address of the accounting server
you are adding
The index number you specify must be in use. The
index numbers of existing servers with this index
number and higher are incremented by 1.
move <index number>
<new index number>
Moves a server up or down the list of RADIUS
accounting servers in the configuration.
•
index number — the original index number of
the server you want to move
•
new index number — the index number
representing the new position of the server in the
list
The index numbers of the remaining entries adjust
accordingly.