User Guide

150 Chapter 4 Configuring the domain
320818-A
The VPN Attribute menu includes the following options:
Configuring the domain using the SREM
To configure the domain, select the Secure Access Domain > Secure Access
Domain Table tab. The Secure Access Domain Table screen appears (see
Figure 19 on page 152), displaying a list of existing domains.
From the Secure Access Domain screens, you can configure and manage the
following:
• domain parameters such as name and portal IP address (pVIP) (see
“Configuring domain parameters using the SREM” on page 164)
• Authentication, Authorization, and Accounting (AAA) features
• for authentication, see “Configuring authentication” on page 233
• for authorization, see “Configuring groups and profiles” on page 191 and
“Configuring the TunnelGuard check using the SREM” on page 168
• for accounting, see “Configuring RADIUS accounting using the SREM”
on page 183
• the SSL server used for the domain portal (see “Configuring the SSL server
using the SREM” on page 174)
• SSL trace commands
• SSL settings
• logging traffic with syslog messages
/cfg/domain #/aaa/radacct/vpnattribu
followed by:
vendorid
Corresponds to the vendor-specific attribute used by
the RADIUS accounting server to identify accounting
information from the Nortel SNAS 4050 domain.
The default Vendor-Id is 1872 (Alteon).
vendortype
Corresponds to the Vendor-Type value used in
combination with the Vendor-Id to identify accounting
information from the Nortel SNAS 4050 domain.
The default Vendor-Type value is 3.