User Guide

Chapter 4 Configuring the domain 153
Nortel Secure Network Access Switch 4050 User Guide
2 Click Add.
The Add a Secure Access Domain dialog box appears (see Figure 20).
Figure 20
Add a Secure Access Domain
3 Enter the domain information in the applicable fields. Table 12 describes the
Add a Secure Access Domain fields.
4 Click Apply.
The new domain appears in the Secure Access Domain Table.
5 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Table 12
Add a Secure Access Domain fields
Field Description
Index Specifies an integer in the range 1 to 256 that uniquely
identifies the domain in the Nortel SNAS 4050 cluster.
Domain Name Specifies a string that identifies the domain on the Nortel
SNAS 4050, as a mnemonic aid. The maximum length of
the string is 255 characters.
Portal VIP Address Specifies the IP address of the Nortel SNAS 4050 portal.
You can have more than one portal VIP (pVIP) for a
domain. To specify more than one pVIP, use a comma
separator.
The pVIP is the address to which the client connects for
authentication and host integrity check. For more
information, see “About the IP addresses” on page 51.