User Guide

Chapter 4 Configuring the domain 161
Nortel Secure Network Access Switch 4050 User Guide
The Domain Quick Wizard — Switch dialog box appears (see Figure 26).
Figure 26
Domain Quick Wizard – Switch
11 To configure a switch, enter the network access device information in the
applicable fields. If you don’t want to add a switch at this time, continue with
step 12.
Table 17 describes the Switch fields.
12 Click Next.
Table 17
Domain Quick Wizard — Switch fields
Field Description
Configure a Switch Specifies whether or not to add a network access device to
the domain.
Type of Switch Specifies the type of network access device from the list.
Valid options are ERS8300 and ERS5500.
VlanId Specifies the Red VLAN ID for the network access device.
IP Address of Switch Specifies the IP address of the network access device.
NSNA Communication Port Specifies the TCP port used for communication with the
Nortel SNAS 4050. The default is port 5000.
Key For Switch Allows you to paste in the switch public SSH key if it was
not automatically retrieved. Alternatively, you can later
import the key from the switch (see “Managing SSH keys
using the SREM” on page 102).