User Guide

Chapter 4 Configuring the domain 171
Nortel Secure Network Access Switch 4050 User Guide
3 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Display SRS Failure Details Specifies whether SRS failure details can be displayed.
• If selected, then the details will be displayed.
• If not selected, the details will not be displayed.
The default is off (details are not be displayed).
If set to
on, the client can click on the TG icon on the portal
page to display details about which elements of the SRS
rule check failed.
Applet Log Level Specifies the log level for debug information from the
TunnelGuard applet. The options are:
•
fatal — displays fatal errors only
•
error — displays all errors
•
warning — displays warning information about
conditions that are not error conditions
•
info — displays high-level information about
processes
•
debug — displays detailed information about all
processes
The default is info.
The information displays in the client’s Java Console
window. You can use the information to track errors in the
TunnelGuard SRS rules.
SRS Rule Table Lists the SRS rules configured for the domain.
For information about creating SRS rules, see
“TunnelGuard SRS Builder” on page 317.
The TunnelGuard applet can apply different SRS rules for
different groups. For information about specifying the SRS
rule to use for the TunnelGuard check, see “Configuring
groups using the SREM” on page 208.
Table 22 TunnelGuard Configuration fields (continued)
Field Description