User Guide

180 Chapter 4 Configuring the domain
320818-A
2 Enter the traffic log information in the applicable fields. Table 26 describes
the Traffic Log Syslog Settings fields.
3 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Table 26
Traffic Log Syslog Settings fields
Field Description
IP Address Specifies the IP address of the syslog server.
UDP Port Specifies the UDP port number of the syslog server.
Accepts an integer in the range 1–65534 that indicates the
UDP port number. The default is 514.
Priority Specifies the priority level of the syslog messages that are
sent. The options are:
• debug — information useful for debugging purposes
only
• info — informational messages
• notice — information about conditions that are not error
conditions but nevertheless warrant special attention
The default value is info.
Facility Specifies the facility parameter of syslog messages.
The facility parameter specifies the type of program logging
the message. The configuration file can then specify
different handling for messages from different facilities.
The default value is local4.
Enabled Enables or disables traffic logging with syslog messages to
the specified syslog server.
Traffic logging with syslog messages is disabled by default.