User Guide

186 Chapter 4 Configuring the domain
320818-A
2 Enter the RADIUS accounting information in the applicable fields. Table 27
describes the RADIUS accounting Configuration fields.
3 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Managing RADIUS accounting servers using the SREM
There are three steps to managing RADIUS accounting servers using the SREM:
• “Adding a RADIUS accounting server using the SREM” on page 186
• “Moving a RADIUS accounting server using the SREM” on page 188
• “Deleting a RADIUS accounting server using the SREM” on page 189
Adding a RADIUS accounting server using the SREM
To configure the Nortel SNAS 4050 to use external RADIUS accounting servers,
perform the following steps:
1 Select the Secure Access Domain > domain > AAA > Radius Accounting >
Radius Accounting Servers tab.
Table 28
RADIUS accounting Configuration fields
Field Description
Enable Radius Accounting Specifies whether RADIUS accounting is enabled or not.
Vendor ID Specifies the vendor-specific attribute used by the RADIUS
accounting server to identify accounting information from
the Nortel SNAS 4050 domain.
The default Vendor-Id is 1872 (Alteon).
Vendor Type Specifies the Vendor-Type value used in combination with
the Vendor-Id to identify accounting information from the
Nortel SNAS 4050 domain.
The default Vendor-Type value is 3.