User Guide

188 Chapter 4 Configuring the domain
320818-A
3 Enter the RADIUS accounting server information in the applicable fields.
Table 29 describes the Radius Accounting Server fields.
4 Click Add.
The RADUIS accounting server appears in the Radius Accounting Server
Table.
5 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Moving a RADIUS accounting server using the SREM
To arrange the order of the RADIUS accounting servers, perform the following
steps:
1 Select the Secure Access Domain > domain > AAA > Radius Accounting >
Radius Accounting Servers tab.
The Radius Accounting Servers screen appears (see Figure 36 on page 187),
listing all servers in the Radius Accounting Server Table.
2 Select the RADIUS accounting server entry from the list.
3 Click either the up or down arrows until the RADIUS accounting server entry
is positioned correctly.
The index values do not update until you apply the changes.
4 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Table 29
Radius Accounting Server fields
Field Description
IP Address Specifies the IP address of the accounting server
Port Specifies the TCP port number used for RADIUS
accounting. The default is 1813
Secret Specifies the password used to authenticate the Nortel
SNAS 4050 to the accounting server.