User Guide

200 Chapter 5 Configuring groups and profiles
320818-A
Figure 38 shows sample output for the /cfg/domain 1/aaa/group
<group ID>
command and commands on the Group menu.
Figure 38
Group menu commands
tgsrs <SRS rule name>
Specifies the preconfigured TunnelGuard SRS rule to
apply to the group.
For information about configuring the SRS rules using
the SREM, see “TunnelGuard SRS Builder” on
page 317. You cannot configure SRS rules in the CLI.
comment <comment>
Sets a comment for the group.
del
Removes the group from the Nortel SNAS 4050
domain. When you delete the group, you also delete all
extended profiles associated with that group ID.
/cfg/domain 1/aaa/group #
followed by:
>> Main# /cfg/domain 1/AAA/group 2
Creating Group 2
Group name: TestGroup
Enter number of sessions (0 is unlimited):
----------------------------------------------------------
[Group 2 Menu]
name - Set group name
restrict - Set number of login sessions
linkset - Linkset menu
extend - Extended profiles menu
tgsrs - Set TunnelGuard SRS Rule
comment - Set comment
del - Remove group
>> Group 2# tgsrs
Current value: ""
Enter TunnelGuard SRS rule name: TestRule
>> Group 2#