User Guide

Chapter 5 Configuring groups and profiles 203
Nortel Secure Network Access Switch 4050 User Guide
Figure 39 shows sample output for the /cfg/domain 1/aaa/filter
<filter ID>
command and commands on the Client Filter menu.
Figure 39
Client Filter menu commands
Configuring extended profiles using the CLI
To create and configure an extended profile, use the following command:
/cfg/domain 1/aaa/group <group ID|group name>/extend
[<profile ID>]
where profile ID is an integer in the range 1 to 63 that uniquely identifies the
profile in the group. If you do not enter the profile ID as part of the command, you
are prompted to do so.
When you first create the extended profile, you must enter the profile ID. After
you have created the extended profile, you can use either the profile ID or the
name of the associated client filter to access the extended profile for configuration.
>> Main# /cfg/domain 1/AAA/filter 3
Creating Client Filter 3
Filter name: branch_pass
----------------------------------------------------------
[Client Filter 3 Menu]
name - Set filter name
tg - TunnelGuard checks passed
comment -Set comment
del - Remove client filter
>> Client Filter 3# tg
Current value: ignore
TunnelGuard passed (true/false/ignore): true
>> Client Filter 3#