User Guide

Chapter 5 Configuring groups and profiles 205
Nortel Secure Network Access Switch 4050 User Guide
Figure 40 shows sample output for the /cfg/domain 1/aaa/group
<group ID>/extend
command and commands on the Extended Profile menu.
Figure 40
Extended Profile menu commands
linkset
Accesses the Linksets menu, in order to map
preconfigured linksets to the profile (see “Mapping
linksets to a group or profile using the CLI” on
page 206).
For information about creating and configuring the
linksets, see “Configuring linksets using the CLI” on
page 411.
del
Removes the extended profile from the group.
/cfg/domain 1/aaa/group #/extend #
followed by:
>> Main# cfg/domain 1/aaa/group 2/extend
Enter profile number or filter reference name (1-63): 1
Creating Extended Profile 1
Enter client filter name:
tg_failed(2) tg_passed(1)
Enter client filter name: tg_passed
Enter VLAN name: green
----------------------------------------------------------
[Extended Profile 1 Menu]
filter - Set client filter reference
vlan - Set VLAN name
linkset - Linkset menu
del - Remove profile
>> Extended Profile 1# ../extend 2/filter tg_failed/vlan
yellow
Creating Extended Profile 2
>> Extended Profile 2#