User Guide

206 Chapter 5 Configuring groups and profiles
320818-A
Mapping linksets to a group or profile using the CLI
You can tailor the portal page for different users by mapping preconfigured
linksets to groups and extended profiles.
For more information about linksets, see “Linksets and links” on page 394.
To map a linkset to a group, access the Linksets menu from the Group menu. Use
the following command:
/cfg/domain 1/aaa/group #/linkset
To map a linkset to an extended profile, access the Linksets menu from the
Extended Profile menu. Use the following command:
/cfg/domain 1/aaa/group #/extend #/linkset
The Linksets menu displays.
The Linksets
menu includes the following options:
/cfg/domain 1/aaa/group #[/extend #]/linkset
followed by:
list
Lists the currently configured linksets by index number.
del <index number>
Removes the linkset entry represented by the specified
index number. The index numbers of the remaining
entries adjust accordingly.
add <linkset name>
Adds a linkset to the group or extended profile. The
linkset displays on the portal page after the user has
been authenticated. You can add as many linksets as
you want.
The Nortel SNAS 4050 assigns an index number to the
linkset name as you add the linkset to the list for the
group. The linksets display on the portal page in the
order of the index numbers.
insert <index number>
<linkset name>
Inserts a linkset at a particular position in the list. The
index numbers of existing linkset entries with this index
number and higher are incremented by 1.
move <index number>
<new index number>
Moves a linkset entry up or down the list. The index
numbers of the remaining entries adjust accordingly.