User Guide

Chapter 5 Configuring groups and profiles 211
Nortel Secure Network Access Switch 4050 User Guide
2 Click Add.
The Add a Group dialog box appears (see Figure 43).
Figure 43
Adding a Group screen
3 Enter the Group information in the applicable fields. Table 31 describes the
Add a Group fields.
4 Click Apply.
The new group appears in the list of groups.
5 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Table 31
Add a Group fields
Field Description
Group ID (Index) An integer in the range 1 to 1023 that uniquely
identifies the group in the Nortel SNAS 4050 domain.
Group Name A string that uniquely identifies the group on the Nortel
SNAS 4050. The group name must match a group
name used by the authentication services.
Maximum Login Sessions The maximum number of simultaneous portal or Nortel
SNAS 4050 sessions allowed for each member of the
group. The default is 0 (unlimited).
Tunnel Guard SRS Rule Specifies the preconfigured TunnelGuard SRS rule to
apply to the group.
For information about configuring the SRS rules using
the SREM, see “TunnelGuard SRS Builder” on
page 317.