User Guide

Chapter 5 Configuring groups and profiles 223
Nortel Secure Network Access Switch 4050 User Guide
2 Enter the Extended Profile information in the applicable fields. Table 36
describes the Extended Profile Configuration fields.
3 Click Apply to create the new extended profile.
The new extended appears appears in the list on the Extended Profiles tab.
Mapping linksets to a group or profile using the SREM
You can tailor the portal page for different users by mapping preconfigured
linksets to groups and extended profiles. Linksets configured for a group display
on the portal page after the linksets configured for the user’s extended profile.
For information about configuring linksets, see “Configuring linksets using the
SREM” on page 439.
Topics in this section include:
• “Mapping linksets to a group” on page 224
• “Mapping linksets to a profile” on page 227
Table 36
Extended Profile Configuration fields
Field Description
Index An integer in the range 1 to 63 that uniquely identifies the
profile in the group.
The default value for this field is the lowest unused index
number available. This value cannot be changed after the
extended profile is created.
Filter Name The name of the predefined client filter that determines
whether the Nortel SNAS 4050 will apply this extended
profile to the user.
VLAN Name The name of the VLAN to which the Nortel SNAS 4050 will
assign users with this profile.