User Guide

Chapter 5 Configuring groups and profiles 225
Nortel Secure Network Access Switch 4050 User Guide
Adding linksets to a group
To add a linkset to a group, perform the following steps:
1 Select the Secure Access Domain > domain > AAA > Groups > group >
Linksets tab.
The Linksets screen appears and displays the Linkset Table (see Figure 51 on
page 224).
2 Click Add.
The Add a Linkset dialog box appears (see Figure 52).
Figure 52
Adding a Linkset screen
3 Enter the linkset information in the applicable fields. Table 37 describes the
Add a Linkset fields.
4 Click Add.
The new linkset appears in the Linkset Table.
5 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Table 37
Add a Linkset fields
Field Description
Name The name of the preconfigured linkset you want to add.