User Guide

244 Chapter 6 Configuring authentication
320818-A
• vendor type for group — corresponds to the Vendor-Type value used in
combination with the Vendor-Id to identify the groups to which the user
belongs. The group names to which the vendor-specific attribute points must
match names you define on the Nortel SNAS 4050 using the
/cfg/domain
1/aaa/group <group ID>
command (see “Configuring groups using the
CLI” on page 198). The default is 1.
If you set the vendor ID to 0 in order to use a standard RADIUS attribute (see
vendor ID), set the vendor type to a standard attribute type as defined in
RFC 2865. For example, to use the standard attribute Class, set the vendor ID
to 0 and the vendor type to 25.
• vendor ID for domain — corresponds to the vendor-specific attribute used by
the RADIUS server to send domain names to the Nortel SNAS 4050. The
default Vendor-Id is 1872 (Alteon).
• vendor type for domain — corresponds to the Vendor-Type value used in
combination with the Vendor-Id to identify the domain. The default is 3.
The Authentication menu displays.