User Guide

252 Chapter 6 Configuring authentication
320818-A
Figure 57 shows sample output for the LDAP method for the /cfg/domain
1/aaa/auth <auth ID>
command and commands on the Authentication
menu.
Figure 57
Authentication menu commands — LDAP
Modifying LDAP configuration settings using the CLI
To modify settings for the authentication method itself, see “Configuring
authentication methods using the CLI” on page 239.
To modify settings for the specific LDAP configuration, use the following
command:
/cfg/domain 1/aaa/auth #/ldap
>> Main# /cfg/domain 1/aaa/auth
Enter auth id: (1-63) 3
Creating Authentication 3
Select one of radius, ldap, or local: ldap
Auth name: ldap
Entering: LDAP settings menu
Entering: LDAP servers menu
IP Address to add: <IPaddr>
Port (default is 389):
Leaving: LDAP servers menu
Search Base Entry: <search base entry>
Group attribute name: <attribute>
User attribute name: <attribute>
isdBindDN: <DN>
isdBindPassword: <password>
Enable LDAPS (true/false):
Leaving: LDAP settings menu
----------------------------------------------------------
[Authentication <auth ID> Menu]
type - Set authentication mechanism
name - Set auth name
display - Set auth display name
domain - Set windows domain for backend single sign-on
ldap - LDAP settings menu
adv - Advanced settings menu
del - Remove Authentication
>> Authentication 3#