User Guide

266 Chapter 6 Configuring authentication
320818-A
import <protocol>
<server> <filename>
<key>
Imports a database from the specified
TFTP/FTP/SCP/SFTP file exchange server. You are
prompted to provide the following information:
•
protocol is the import protocol. Options are
tftp|ftp|scp|sftp.
• server is the host name or IP address of the
server.
• filename is the name of the database file on the
server.
•
key is the password key for user password
protection. For a database file whose passwords
were protected with a key when the file was
exported, the key you must provide is the same as
the password key provided at the time of export. If
the file is not protected with a key, enter any
characters (a minimum of four) when prompted.
• FTP user name and password, if applicable.
The file you import must be in ASCII format. Each row
entry consists of values for user name, password, and
group, separated by a colon (for example,
username:password:group)
Passwords in the imported database can be clear-text
or encrypted. Clear-text passwords will be encrypted
after import.
The imported database overwrites existing entries in
the local database.
/cfg/domain 1/aaa/auth #/local
followed by: