User Guide

278 Chapter 6 Configuring authentication
320818-A
3 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Authentication Protocol Specifies the protocol used for communication between the
Nortel SNAS 4050 and the RADIUS server. The options
are:
• PAP — Password Authentication Protocol (PAP)
• CHAPv2 — Challenge Handshake Authentication
Protocol (CHAP), version 2
The default is PAP.
Vendor ID Specifies the vendor-specific attribute used by the RADIUS
server to send a session timeout value to the Nortel
SNAS 4050. The default Vendor-Id is 0.
With the Vendor-Type also set to 0 (the default value), the
RADIUS server sends the standard attribute for session
timeout.
Vendor Type Specifies the Vendor-Type value used in combination with
the Vendor-Id to identify the session timeout value to send
to the Nortel SNAS 4050. The default is 0.
State Enables of disable retrieval of the RADIUS server session
timeout value. The default is disabled.
Table 42 Radius Configuration fields (continued)
Field Description