User Guide

280 Chapter 6 Configuring authentication
320818-A
The RADIUS Server Table allows you to manage additional RADIUS servers by
performing any of the following procedures:
• “Adding a RADIUS server” on page 280
• “Reordering additional RADIUS servers” on page 281
• “Removing a RADIUS server” on page 281
Adding a RADIUS server
To add additional RADIUS servers for redundancy, perform the following steps:
1 Select the Secure Access Domain > domain > AAA > Authentication >
radius > Radius Servers tab.
The RADIUS Servers screen appears (see Figure 64 on page 279).
2 Click Add.
The Add a Radius Server dialog box appears (see Figure 65).
Figure 65
Add a Radius Server
3 Enter the RADIUS server information in the applicable fields.
Table 43 describes the Add a RADIUS Server fields.
Table 43
Add a Radius Server fields
Field Description
IP Address Specifies the IP address of the RADIUS server.