User Guide

282 Chapter 6 Configuring authentication
320818-A
The RADIUS Servers screen appears (see Figure 69 on page 291).
2 Select an RADIUS server entry from the RADIUS Server Table.
3 Click Delete.
A confirmation dialog appears.
4 Click Yes.
The RADIUS server is removed from the RADIUS Server Table.
5 Click Apply on the toolbar to accept the new order, and adjust index numbers
for the RADIUS servers accordingly. Click Commit on the toolbar to save the
changes permanently.
Next steps
1 Configure additional authentication methods, if desired (see “Configuring
LDAP authentication using the SREM” on page 282 or “Configuring local
database authentication using the SREM” on page 298).
2 Set the authentication order (see “Specifying authentication fallback order
using the SREM” on page 314).
3 Commit the changes (see “Saving authentication settings” on page 316).
Configuring LDAP authentication using the SREM
To configure the Nortel SNAS 4050 to use LDAP authentication, perform the
following steps:
1 Add the LDAP method to the domain and specify the LDAP server (see
“Adding the LDAP method and server” on page 283).
2 Modify the LDAP configuration settings, if desired (see “Modifying LDAP
configuration” on page 284).
3 Add extra LDAP servers, for redundancy, if desired (see “Managing
additional LDAP servers” on page 291).
4 Add LDAP macros, if desired (see “Managing LDAP macros” on page 294).