User Guide

284 Chapter 6 Configuring authentication
320818-A
3 Click Apply.
The LDAP authentication method displays in the Authentication Server Table.
4 Click Apply on the toolbar to send the current changes to the Nortel
SNAS 4050. Click Commit on the toolbar to save the changes permanently.
Modifying LDAP configuration
You can modify the LDAP configuration in the following ways:
• Modify settings for the authentication method itself (see “Modifying LDAP
method settings” on page 285).
• Modify settings for the specific LDAP configuration (see “Modifying LDAP
configuration settings” on page 287).
Display Name Specifies a name for the method, to display in the Login
Service list box on the portal login page, together with the
names of other authentication services available.
IP Address Specifies the IP address of the RADIUS server.
Port Specifies the port number configured for this server to use
on the RADIUS server. The default is 1812.
Table 44 Add an Authentication Server — LDAP fields (continued)
Field Description