User Guide

292 Chapter 6 Configuring authentication
320818-A
The LDAP Server Table allows you to manage additional LDAP servers by
performing any of the following procedures:
• “Adding an LDAP server” on page 292
• “Reordering additional LDAP servers” on page 293
• “Removing an LDAP server” on page 293
Adding an LDAP server
To add an additional LDAP server, perform the following steps:
1 Select the Secure Access Domain > domain > AAA > Authentication >
ldap > LDAP Servers tab.
The LDAP Servers screen appears (see Figure 69 on page 291).
2 Click Add.
The Add an LDAP Server dialog box appears (see Figure 70).
Figure 70
Add an LDAP Server
3 Enter the LDAP server information in the applicable fields.
Table 47 describes the Add an LDAP Server fields.
4 Click Apply.
Table 47
Add an LDAP Server fields
Field Description
IP Address Specifies the IP address of the LDAP server.
Port Specifies the port number configured for this server to use
on the LDAP server. The default is 1812.